Epson manual Mounting the IWE3200-H on a Wall, Mounting the IWE3200-H on a wall

Fig. 4. Connecting Ethernet cables to IWE500-INJ.

5.Check the “ACTIVE” LED: if power is successfully fed into the IWE3200-H, the “ACTIVE” LED will be on (Red light); otherwise, the “ACTIVE” LED will be off.

6.If the electricity current is over the normal condition (Io＞1.0 A), the “ACTIVE” LED will flash (Red light).

NOTE:

IWE500-INJis specially designed for IWE3200-H. The use of IWE500-INJwith other Ethernet-ready devices that are not compliant to IEEE 802.3af may cause damage to the devices.

2.2. Mounting the IWE3200-H on a Wall

The IWE3200-His wall-mountable.

1.Stick the supplied sticker for wall-mounting.

2.Use a φ6.5mm driller to drill a 25mm-deep hole at each of the cross marks.

3.Plug in a supplied plastic conical anchor in each hole.

4.Screw a supplied screw in each plastic conical anchor for a proper depth so that the IWE3200-Hcan be hung on the screws.

5.Hang the IWE3200-Hon the screws.

Fig. 5. Mounting the IWE3200-H on a wall.

9