Manuals / Epson / Computer Equipment / Network Router

Epson IWE3200-H manual

Models: IWE3200-H

1 80

Download 80 pages 58.59 Kb

Page 43

Manual background

Fig. 57. TCP/IP settings for Router with a DHCP-Based DSL/Cable Connection mode.

If the IWE3200-Hwas set to be in Router with a DHCP-Based DSL/Cable Connection mode, two IP addresses are needed—one for the Ethernet LAN interface and the other for the WAN interface. The LAN IP address must be set manually to a private IP address, say 192.168.0.xxx. The default LAN IP address is 192.168.0.1 and the default subnet mask is 255.255.255.0. In most cases, these de- fault settings need no change.

As for the WAN IP address, it is obtained by DHCP from the ISP. The Trigger mode setting affects the behavior of the DHCP client of the Router. In Auto mode, you don’t have to worry about the DHCP process; the device takes care of everything. In Manual mode, there are two buttons on the Start page for you to manually release an obtained IP address (Release) and re-obtain a new one from a DHCP server (Renew).

‘Heartbeat for BigPond Cable’ is the settings for service of Telstra, Australia. Please consult the Tel- stra ISP for detail information.

Custom MAC Address of WAN Interface enables you to change the MAC address of the Ethernet WAN interface. Therefore, if the ISP-provided DSL or cable modem works only with the ISP-provided Ethernet card for a computer, the WAN interface of the Router can mimic the ISP-provided Ethernet card by changing its MAC address to the Ethernet card’s MAC address.

2.11.1.3. Router with a Static-IP DSL/Cable Connection

Fig. 58. TCP/IP settings for Router with a Static-IP DSL/Cable Connection mode.

If the Router was set to be in Router with a Static-IP DSL/Cable Connection mode, two IP ad- dresses are needed—one for the Ethernet LAN interface and the other for the WAN interface. The LAN IP address must be set manually to a private IP address, say 192.168.0.xxx. The default LAN IP address is 192.168.0.1 and the default subnet mask is 255.255.255.0. In most cases, these default set- tings need no change.

As for the WAN IP address, it must be manually set. Consult your ISP for the correct IP address, Default Router, Subnet mask, Primary DNS server, and Secondary DNS server settings.

Custom MAC Address of WAN Interface enables you to change the MAC address of the Ethernet WAN interface. Therefore, if the ISP-provided DSL or cable modem works only with the ISP-provided Ethernet card for a computer, the WAN interface of the Router can mimic the ISP-provided Ethernet card by changing its MAC address to the Ethernet card’s MAC address.

38

Image 43

Epson IWE3200-H manual

Contents

IWE3200-H HotSpot Gateway Version: Last Updated: 08/11/2006User’s Guide FCC Radiation Exposure Statement EU Countries Not Intended for Use SafetyR&TTE Compliance Statement EU Countries Intended for UseTable of Contents 2.13.2. RADIUS 1.1. Overview 1. IntroductionzIEEE 802.11b/g Compliant „Wireless Operation 1.2. FeatureszInternet Connection Sharing zNetwork Security zManagement zFirmware ToolsIn addition, it can also be configured to accept management commands only from specific hosts Wireless Advanced 1.4. Feature Comparison1.3. LED Definition Wired Advanced2.1. Selecting a Power Supply Method 2. First-TimeInstallation and Configuration2.2. Mounting the IWE3200-Hon a Wall 2.3. Preparing for Configuration 2.4.1. Entering the User Name and Password 2.4. Configuring the IWE3200-HFig. 9. Operational modes Fig. 8. The Home PagePage 2.4.3.3. Router with a Static-IPDSL/Cable Connection 2.4.4. SETUP WIZARD Step 3: DHCP Server Settings 2.4.6.1. Web Redirection 2.4.6. Configuring User Authentication SettingsTo setup the Local Authentication method 2.4.6.2. Local Authentication SeverFig. 20. Ticket Setting To setup the mini-POSTicket Printer 2.4.6.3. How to Setup the mini-POSTicket PrinterThe usage of control keypad 2.4.6.4. IEEE 2.4.7. Configuring RADIUS Settings2.5. Deploying the IWE3200-H 2.6.1. Configuring IEEE 802.11-RelatedSettings 2.6. Setting up Client ComputersTo establish a wireless link to an AP 2.6.2. Configuring TCP/IP-RelatedSettings Fig. 28. User name and password for authentication 2.8.1. Menu Structure 2.8. Using Web-BasedNetwork ManagementzTCP/IP. TCP/IP-relatedsettings 2.8.3. Home and Refresh Commands 2.8.2. Save, Save & Restart, and Cancel CommandsIWE3200-H 2.9.2. Authenticated Users 2.9.1. Associated Wireless Clients2.9. Seeing Status 2.9.4. Session List 2.9.3. Account Table2.9.5. Managed LAN Devices 2.10. System2.10.1. Specifying Operational Mode Fig. 43. Operational modes 2.10.3.1. Upgrading Firmware by HTTP 2.10.2. Changing Password2.10.3. Managing Firmware To upgrade firmware of the access Router by HTTP2.10.3.3.Upgrading Firmware by TFTP To upgrade firmware of the access Router by TFTP To restore configuration of the IWE3200-Hby TFTP 2.10.4. Setting Time Zone 2.11. Configuring TCP/IP Related Settings2.11.1. Address 2.11.1.1.Router with a PPPoE-BasedDSL/Cable Con- nection Page 2.11.2.1. DNS Proxy 2.11.2. DNSTo give an internal server a domain name 2.11.3.NAT2.11.2.2. Static DNS Mappings 2.11.3.1.Basic2.11.4.1. Functionality 2.11.4. DHCP ServerTo expose “preset” internal servers 2.11.3.2. Virtual Server Mappings2.11.4.3. Static DHCP Mappings 2.11.4.2. Basic2.11.5. Load Balancing 2.11.6. Zero Client Reconfiguration 2.12. Configuring Wireless Settings2.12.1. Communication 2.12.1.2. Wireless Distribution System To enable a WDS link 2.12.2.1. Basic 2.12.2. SecurityThere are up to 7 security modes 2.Set the Access control type to exclusive 2.12.2.2. MAC-Address-BasedAccess Control2.Set the Access control type to inclusive To download a MAC ACL file from a TFTP server To delete an entry in the access control table3.Click Download 2.13.1. Web Redirection 2.13.1.1. Basic 2.13.1.2. Unrestricted Clients To specify a uncontrolled computer by MAC address 2.13.1.3.Walled GardenTo add a link to the walled garden 2.13.2. RADIUS 2.13.2.2. Robustness 2.13.2.1. Basic2.13.4. Authentication Page Customization 2.13.3. Authentication Session ControlTo specify an advertisement link 2.14. DDNS 2.15.1.Filters and Firewall 2.15. Configuring Advanced SettingsTo set a rule for packet filtering 2.15.1.3. Firewall 2.15.1.2. VLAN2.15.1.4. URL Filters To block HTTP traffic to an unwelcome Web site 2.15.2.Management2.15.2.1.Basic 2.15.2.2.UPnP2.15.2.3. System Log 2.15.2.4. SNMP 2.15.3. LAN Device ManagementTo specify a trap target To specify a LAN device to manage Default Value A-1:Default SettingsAppendix A Setting NameDNS Proxy A-2:LED DefinitionsA-3:Rear Panel AuthenticationB-1:TCP/IP Settings Problems Appendix B: TroubleshootingSolve the following problems in order zCannot access the Internet B-2:Wireless Settings ProblemsIWE3200-H B-3:Other Problems Standards Appendix C: Technical SpecificationsC-1: IWE3200-H Transmission output PowerWeight Configuration and ManagementPower Supply Dimensions without antennaSafety Approval C-2: IWE500-INJPower InjectorInput Power Requirements Power over LAN output SpecificationC-3: IWE810-POS mini-POSTicket Printer