The
To block HTTP traffic to an unwelcome Web site:
1.Specify the URL (ex. www.xxx.com) of the unwelcome Web site.
2.Select the corresponding Enabled check box.
NOTE:
Do not type “http://” when specifying a URL. Just type the domain name.
2.15.2.Management
2.15.2.1.Basic
Fig. 103.
The
In addition, if the management type is set to WAN Only, the Router can be configured to be man- ageable only from specific hosts. In this way, security of remote management is enhanced.
To make the Router remotely manageable from specific hosts within an IP address range:
1.Select the Only allow the following managing hosts check box.
2.Type the Starting IP address and the End IP Address of the host IP address range.
3.Select the corresponding check box next to the IP address range.
2.15.2.2.UPnP
Fig. 104. UPnP settings.
62