System 10 InWall Speakers

Proportions illustrated are for 16" on-center 2" X 4" stud installation.

See table below for proper dimensions.

Toe nail or screw to hold firebock in position until sealant dries.

Seal edges with caulking

Mounting Hole

Outline

Speaker Frame

Outline

See table for proper dimension

System 10 LCR InWall Enclosure Recommendations

Please use this information to construct an in-wall enclosure if you so desire. Doing so will generally improve the performance and increase the power handling of the system. We have not included information for the System 10 SR since one of its woofers is self-enclosed and the other will not generate anywhere near the bass energy the LCR system will.

Be sure to line the cavity with weatherproof insulation, being careful to avoid letting the insulation touch the backs of the woofer cones. It’s also important to seal the joints of the enclosure with a high quality non-shrinking caulk.

Be careful to keep the wires from touching the chassis of the drivers or baffle in such a manner that the wire might vibrate and buzz. You may use nylon wire ties to keep the wires properly positioned. Such ties are available that are designed to screw directly to studs making them ideal for this purpose.

As always, take care to wire the speakers properly, with the positive lead (normally marked with a red terminal or a “+” sign) from the amplifier connected to the positive terminal on the speakers and the negative (marked with a black terminal or a “-” sign) connected to its respective terminals.

2 x 4 Construction

1ft3

1.25ft3

16" O.C.Studs

34"

42.5"

24" O.C. Studs

22"

27.5"

2 x 6 Construction

1ft3

1.25ft3

16" O.C.Studs

21.7"

27"

24" O.C. Studs

16"*

17.5"

*Minimum cut out height is 15.8". Placing the fire block at 16" yields an internal volume of 1.15ft3.

System 10 LCR

System 10 SR

Dimensions

17 1/4"H x 8 7/16"W x 3 5/8"D

Dimensions

12 1/16"H x 15 5/8" x 3 5/8"D

Cut-out Dimensions

15 13/16"H x 7"W

Cut-out Dimensions

11"H x 14 3/8"W

Optimum wall volume

0.5 - 1.25 cu. ft.

Optimum wall volume

0.5 cu. ft. or greater

Orientation

Vertical (Portrait)

Orientation

Horizontal (Landscape)

Drivers/Design

2 - 6.5" IMG woofers

Drivers/Design

2 - 4.5" IMG woofers

 

1 - 1" Silk dome tweeter

 

2 - 3/4" soft dome tweeter

 

D'Appolito array

 

Frequency Enhanced Dipole

Frequency Response

46 - 20kHz +/- 3dB

Frequency Response

100 - 20kHz +/- 3dB

Sensitivity

89dB

Sensitivity

88dB

Impedance

6 Ohms

Impedance

6 Ohms

Crossover Frequency

3400Hz, 4th order Linkwitz-Riley

Crossover Frequency

5000Hz

Companion Components

Subwoofer(s):

Companion Components

Satellites:

 

4.5 PBM, 172 PBM, 272 PBM

 

System 10 LCR, 171 LR, 271 LR

 

Surround(s):

Required Mounting Bracket

IN-INST-20SR

 

System 10 SR, 4.5 SR, 174 SR,

New Construction Kit

Same as above

 

274T SR, System 20 SR

 

 

Mounting Brackets for

 

 

 

Surround Speakers

174 SR = IN-RF BRK (no trim kit)

 

 

 

274 T = 274 IN-RF (w/trim kit)

 

 

New Construction Kit

IN-NC-10

 

 

010-1164

● ● ● ● ● ● ● 8● ● ● ● ● ● ● ● ● ● ●

Page 7 Page 8
Page 8
Image 8
Atlantic Technology SYSTEM10SRDIPOLESURROUND System 10 LCR InWall Enclosure Recommendations, 24 O.C. Studs 17.5
Page 7 Page 8

SYSTEM10LCR, SYSTEM10SRDIPOLESURROUND specifications

Atlantic Technology offers innovative audio solutions designed to enhance your home theater experience, and two of their standout products are the SYSTEM10SRDIPOLESURROUND and SYSTEM10LCR speakers. These models exemplify cutting-edge technology and thoughtful design, catering to audiophiles and casual listeners alike.

The SYSTEM10SRDIPOLESURROUND speaker is engineered to create an immersive sound environment using its unique dipole configuration. This design allows the speaker to deliver sound from two sides, dispersing sound waves throughout the listening area, which creates a more enveloping experience and minimizes reflection from walls. The dipole design is especially effective in rear surround channels, producing a more cinematic feel by blending sound seamlessly into the background. The key feature of the SYSTEM10SRDIPOLESURROUND is its adjustable switching capability, allowing users to toggle between dipole and monopole operation, depending on their listening preferences and room acoustics.

Complementing the surround experience is the SYSTEM10LCR, a versatile speaker designed for left, center, and right channel operations. Featuring a sleek, low-profile design, the SYSTEM10LCR is not only sophisticated in sound but also complements any home decor. This speaker effectively utilizes high-quality drivers and advanced crossover technology to ensure clarity and precision across the frequency spectrum. With a robust cabinet construction, the SYSTEM10LCR minimizes cabinet resonance, leading to cleaner sound reproduction.

One of the critical characteristics of both the SYSTEM10SRDIPOLESURROUND and SYSTEM10LCR speakers is their compatibility with high-resolution audio formats. They are designed to handle a wide dynamic range, resulting in the ability to reproduce subtle nuances in music and movie soundtracks. The durable build quality ensures longevity, while the aesthetic appeal accommodates various room environments.

In conclusion, Atlantic Technology's SYSTEM10SRDIPOLESURROUND and SYSTEM10LCR speakers represent a marriage of innovative technology and elegant design. Their dipole surround capabilities and versatile LCR function make them an ideal choice for anyone looking to elevate their audio experience, whether for film, music, or gaming. With these speakers, Atlantic Technology continues to set a standard in the home entertainment market, ensuring users receive an unparalleled auditory journey.
Top Page Image Contents