Clipper USB

PORTMEANING

Connect the supplied USB cable to

USBthis port when connecting to the Personal Computer.

Connect the supplied ADSL(RJ11)

LINEcable to this port when connecting to

the ADSLnetwork.

1.7 Information from ISP

Before you start installing this device, you have to check with your ISP what kind of service (connection method) is provided such as PPPoE, PPPoA, RFC1483 bridged or routed, IPoA.

Gather the information as illustrated in the following table and keep it for reference.

If your ISP provides PPPoE or PPPoA connection method, please select “PPPoA or PPPoE” to install driver. If your ISP provides RFC1483 Bridged or Routed or IPoA, please select “RFC1483 Routed” to install driver.

VPI/VCI: Consult the telephone company to get the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI) numbers. The valid range for the VPI is 0 to 255 and for the VCI is 32 to 65535. The default value VPI is 0 and VCI is 32. For BT (VPI=0, VCI=38) and for KC (VPI=1, VCI=50). NAT: The NAT feature allows multiple-user Internet access for the cost of a single IP account. Encapsulation Method: Be sure to use the encapsulation method (LLC/SNAP or VC MUX) required by your ISP. Gather the information as illustrated in the following table and keep it for reference.