Clipper USB

•USB bus-powered; no external power supply is required.

•Hot Plug and Play for Microsoft Windows 98 (SE), 2000, Me, and XP

•Mac OS and Linux

•Supports NDIS interface for RAS and Dial-Up Networking

•Software upgradable

•Supports multiple data encapsulation formats, including PPPoE, PPPoA, IPoA, and RFC1483 bridged or routed

•Friendly GUI Configuration Program

1.4Before Installing

Make sure that you have all you need to install the Clipper USB. You should have the following:

•A PC that has USB connector and its USB controller is working properly as shown below

•Microsoft Windows 98SE, ME,2000 or XP

•Mac OS: 9.2.1 / 10.1 / 10.2.3

•Linux OS: [RedHat 7.1 (kernel 2.4.2-2), RedHat 8.0 (kernel 2.4.18-14), RedHat 9.0 (kernel 2.4.20-8)]

•At least 10MB of free disk space for the driver and software

•An ADSL contract

•Intel® Pentium®III 600Mhz or compatible processor with 128MB RAM with CDRom drive