Clipper USB

Server IP address provided by your ISP. Then, press the Add button.

1.14 Advanced Configuration

Once the Clipper ADSL USB Modem and software have been installed, the communication settings may be easily updated by performing the following steps: From your PC desktop, click Start->Programs-> Clipper ADSL USB Modem->Configure.The Communication Settings window will be displayed.

Make the necessary changes to the VPI/VCI, Encapsulation type and/or Modulation type and click Next>. The system has rebooted to have the new setting take effect, therefore, the Reboot window will appear, select Yes, reboot the computer now, and click close to reboot.