Atlantis Land A01-IU1 manual Windows 98SE/ME

ENGLISH

You should not connect the MISTRAL USB to a bus-powered USB hub device, such as keyboard, because there could be not enough power for the ISDN TA.

•All the LEDs will be lit and, then, extinguished one by one.

•Windows will tell you that the new device has been detected. You will then see the following screen. Click Next >.

•Select Search for a suitable driver for my device (In Windows XP select Install from a list or specific location). Click Next>. In next window, check Specify a location and click Next>.

•Click Browse… to specify the driver directory such as CDRom:\Mistral USB\Driver for installing Mistral USB Adapter . Click OK and then Next> to continue.

•When windows titled Digital Signature Not Found appear, press Yes to continue the installation.

•When the installation is completed, click Finish button.

1.8Windows 98SE/ME

Please refer to the following instructions and figures for installation procedures:

•Connect your ISDN line to the RJ-45 jack labeled LINE on the back of the Mistral USB.

•Connect the USB cable to the jack labeled USB on the back of the Mistral. Connect the other end to the PC or to a self-powered USB hub device, e.g., monitor.

35