Kodak A-61602 manual Troubleshooting, Indicator lights and error codes Clearing a document jam

6 Troubleshooting

Indicator lights and error codes

Clearing a document jam

Occasionally you may encounter a situation with your scanner where it may not function properly. Refer to the information in this chapter to help you resolve the situation before calling Technical Support.

The indicator lights provide information on the current state of the scanner.

Flashing green: indicates the scanner is initializing from powering on or warming up from a power saving mode and preparing to scan.

Steady green: indicates the scanner is ready to scan.

Flashing red: indicates a scanner error, such as the scanner cover is open.

Following is a listing of the error codes that may be displayed in the function window. When an error is indicated, the red indicator will blink as numbers are displayed in the function window.

1-4 Scanner failure.

5Internal test.

6Light check failure.

7Command failure.

8Document jam.

9, 0 Internal test.

15 Cover is open.

If your scanner stops scanning due to a document jam, follow the procedures below:

1. Open the scanner cover.

2.Remove any jammed documents from inside the scanner.

3.Close the cover.

A-61602 January 2008 83