Changing Image settings
1.Select a Setting Shortcut from the main Kodak Scanner window that closely describes your desired output.
2.Select an Input document is option from the main Kodak Scanner window.
3.Select Settings to display the Image Settings window.
4.Before making any adjustments, browse through the tabs on the Image Settings window to get familiar with options that are available.
5.For each option you want to use, make the appropriate selections you want the scanner to perform when scanning.
6.If you want to see the result of your options:
•Place a representative document in the input tray of the scanner.
•Select Preview to perform a preview scan.
NOTE: If the images are not acceptable, you can either select a different Setting Shortcut or continue working with the current Setting Shortcut by reviewing each tab within the Image Settings window again. Repeat this step as needed.
7.When finished, select Home to return to the main Kodak Scanner window and then select Save to save your selections to the shortcut.
| 67 |
