Smart touch functionality
Smart touch functionality allows you to quickly and easily perform common scanning tasks. Nine different functions can be assigned and performed. You can perform any of the functions by pressing the Start button on the scanner or by selecting the function from the smart touch function listing. Predefined tasks are assigned to the functions so you can immediately use the functions after installation. However, you can easily configure each function to handle the tasks that are most important to you.
Smart touch functionality runs from the system tray, making it easily accessible when you need it. After the software drivers and scanner are properly installed, smart touch is started and a Scanner icon will be displayed on the system tray.
NOTE: If the Scanner icon indicates that the scanner is not ready, make sure the scanner is powered on and the USB cable is connected.
•Click on the Scanner icon on the system tray to display the smart touch function listing. This list displays the currently configured functions.
Function listing — click on one of the functions to run the assigned task.
Configure — select Configure to change the task assigned to a function.
About — displays the version number and information about smart touch.
24 |
|
