Wireless Multi-Function Access Point

ƒMode Setting: To setting the AP operation mode for 802.11g only or 802.11b/802.11g mix mode

ƒTX Rates: Select one of the wireless communications transfer rates, measured in megabytes per second, based upon the speed of wireless adapters connected to the WLAN.

3.9 Security

This page is where user configures the security features supported by this Access Point.

ƒPassword: Allow user to change the new login password. Here are the necessary steps:

1.Enter the new password in the “AP Password New:” field.

2.Enter the new password again in the “Confirm” field.

3.Click “Apply”

ƒMAC Filter: MAC Filter function controls the MAC of the network devices that are listed in this table for access authorization or denial. There have three choices:

1.Disable MAC Filters

A02-AP1-W54

Pag. 35