Monitor List
All the Web Smart Device in the Monitor List can be monitored; you can also receive the trap and show the status of the device.
System word definitions in the Monitor List:
• S: Shows the system symbol of the | represent for device system is not |
alive. |
|
•IP Address: Shows the current IP address of the device.
•MAC Address: Shows the device MAC Address.
•Protocol version: Shows the version of the Utility protocol.
•Product Name: Shows the device product name.
•System Name: Shows the appointed device system name.
•Location: Shows where the device is located.
•Trap IP: Shows the IP where the Trap to be sent.
•Subnet Mask: Shows the Subnet Mask set of the device.
•Gateway: Shows the Gateway set of the device.
View Trap: The Trap function can receive the events that happen from the Web Management Switch in the Monitor List.
There is a light indicator behind the “View Trap” button, when the light indicates in green, it means that there is no trap transmitted, and else when it indicates in red, it means that there is new trap transmitted, this is to remind us to view the trap.
When the “View Trap” button is clicked, a Trap Information window will pop out, it will show the trap information including the Symbol, Time, Device IP and the Event occured.
The symbol “
” represents the trap signal arise, this symbol will disappear after you review and click on the event record
11
