IP Wireless Security

Camera

Link LED

The Link LED is positioned on the right side of the IP Security Wireless Camera’s lens while facing the IP Security Wireless Camera. It is located right of the Power LED

A steady orange light confirms that the camera has good connection to LAN connectivity. Dependent on the data traffic the LED will begin to flash to indicate that the IP Security Wireless Camera is receiving/sending data from/to the network.

4.2 Rear Panel

Network Cable Connector

The IP Security Wireless Camera’s rear panel features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should be Category 5 twisted-pair cable). The port supports the NWay protocol, allowing the IP Security Wireless Camera to automatically detect or negotiate the transmission speed of the network.

A02-IPCAM-W54_ME01

10