IP Wireless Security Camera
Click About to show the general information of the selected camera.
Click Exit to close the Setup Wizard.
Changing the Admin ID and Password
By default settings, the Admin ID and Password are blank. For security purpose, you are recommended to change the Admin ID and Password immediately.
Click Wizard. The dialog box as shown appears, asking you to enter the Admin ID and Password.
Click OK.
If required, select the Change options and enter the new
Admin ID and Password.
Click Next.
The settings of IP Address, Subnet Mask and Default Gateway must correspond with your camera and networking settings. Please check with your network administrator for correct settings.
Click Next.
36 |