IP Wireless Security

Camera

Chapter 8

Software Installation

This section describes the Software installation procedure of the IP Security Wireless Camera for Web Configuration and IPView SE application.

8.1 Web Configuration

The IP Security Wireless Camera must be configured through its built-in Web-based Configuration. Extensive knowledge of LAN will be helpful in setting up the IP Security Wireless Camera

From the web browser, enter the default IP address to access the Welcome screen of the IP Security Wireless Camera. To configure your IP Security Wireless Camera, type http://192.168.0.20 in the address box. The number is the default IP address of your IP Security Wireless Camera. Then, press [Enter].

The PC’s IP address must correspond with the IP Security Wireless Camera’s IP address in the same segment for the two devices to communicate.

A02-IPCAM-W54_ME01

17