Atlantis Land A02-IPCAM-W54 manual 69

			IP Wireless Security Camera
I cannot access the IP		Other possible problems might be due to the network cable.
Security	Wireless	Try replacing your network cable. Test the network interface
Camera	from a web	of the product by connecting a local computer to the unit,
browser.		utilizing a standard Crossover (hub to hub) Cable. If the
		problem is not solved the IP Security Wireless Camera might
		be faulty.

Question			Answer
Why	does	the Power	The power supply used might be at fault. Confirm that you
LED	not	light up	are using the provided power supply DC 5V for the IP
constantly?			Security Wireless Camera and verify that the power supply is
			well connected.

Question	Answer
Why does the Link LED	•	There might be a problem with the network cable. To
not light up properly?		confirm that the cables are working, PING the address
		of a know device on the network. If the cabling is OK
		and your network is reachable, you should receive a
		reply similar to the following (…bytes = 32 time = 2
		ms).
	•	The network device utilized by the IP Security
		Wireless Camera is not functioning properly such as
		hubs or switches. Confirm the power for the devices
		are well connected and functioning.
	• The wireless connection might be at fault. In ad-hoc
		mode make sure the IP Security Wireless Camera
		wireless channel and ESS-ID is set to match the
		PC/Notebook wireless channel and ESS-ID for direct
		communication. Under infrastructure mode make
		sure the ESS-ID on the PC/Notebook and the IP
		Security Wireless Camera must match with the
		Access Point’s ESS-ID.

	Question		Answer
	Why does	the IP	• Might be caused from the firewall protection. Need to
	Security	Wireless	check the Internet firewall with your system
	Camera work	locally	administrator.
	but not externally?
			• The default router setting might be a possible reason.
			Need to double check if the configuration of the
			default router settings is required.
A02-IPCAM-W54_ME01			42