WebShare 142W

5.5 Configuring LAN

Click “Interface Setup” then LAN” to open the following screen.

The following table describes the labels in this screen.

 

 

 

Router Local IP

 

 

IP Address

Enter the IP address of the ADSL Router in dotted decimal

 

 

notation, for example, 192.168.1.254 (factory default).

 

 

IP Subnet Mask

Type the subnet mask assigned to you by your ISP (if given).

 

RIP Direction

Select the RIP direction from None, Both, In Only and Out

 

 

Only.

 

 

RIP Version

Select the RIP version from RIP-1, RIP-2B and RIP-2M.

 

 

Multicast

IGMP (Internet Group Multicast Protocol) is a session-layer

 

 

protocol used to establish membership in a multicast group.

 

 

The ADSL Router supports both IGMP version 1 (IGMP-v1)

 

 

and IGMP-v2. Select None to disable it.

 

 

Save

Click this button to save these settings back to the ADSL

 

 

Router.

 

 

Cancel

Click this button to reset the fields in this screen.

 

 

 

A02-RA142-W54

Pag. 33