
WebShare 142W
be on if the port is connected to a computer or hub. If the 10M/100M LEDs on the front panel are both off, refer to Section A.1.2.
2Make sure that the IP address and the subnet mask of the ADSL Router and your computer(s) are on the same subnet.
A.6 WAN Interface
Initialization of the ADSL connection failed.
STEPS | CORRECTIVE ACTION |
1 | Check the cable connections between the ADSL port and the |
| wall jack. The DSL LED on the front panel of the ADSL Router |
| should be on. |
2 | Check that your VPI, VCI, type of encapsulation and type of |
| multiplexing settings are the same as what you collected from |
| your telephone company and ISP. |
3 | Restart the ADSL Router. If you still have problems, you may |
| need to verify your VPI, VCI, type of encapsulation and type of |
| multiplexing settings with the telephone company and ISP. |
I cannot get a WAN IP address from the ISP.
STEPS | CORRECTIVE ACTION |
1 | The ISP provides the WAN IP address after authenticating you. |
| Authentication may be through the user name and password, |
| the MAC address or the host name. |
2 | The username and password apply to PPPoE and PPoA |
| encapsulation only. Make sure that you have entered the correct |
| Service Type, User Name and Password (be sure to use the |
| correct casing). |
A.7 Internet Access
I cannot access the Internet.
STEPS | CORRECTIVE ACTION |
1 | Make sure the ADSL Router is turned on and connected to the |
| network. |
2 | If the DSL LED is off, refer to Section A.1.3. |
3 | Verify your WAN settings. |
|
|
4 | Make sure you entered the correct user name and password. |
Internet connection disconnects.
Pag. 81 |