
WebShare 340/440
3.4.1 Username and Password
The default username and password are admin and atlantis respectively.
If you ever forget the password to log in, you may press the RESET button to restore the factory default settings. After turning the router on press the Emergency/Failure Recovery Button on the back of the modem, and hold the button in until all lights on the modem flash and it reboots with factory default settings. The login will be reset to admin and the password will be reset to admin, and the modem will be accessible via its default IP address at http://192.168.1.254/
3.4.2 LAN and WAN Port Addresses
The parameters of LAN and WAN ports are
LAN Port |
|
| WAN Port |
|
|
|
|
IP address |
| 192.168.1.254 | N/A |
|
|
| |
|
|
|
|
Subnet Mask |
| 255.255.255.0 |
|
|
|
| |
|
|
|
|
DHCP | server | Enabled |
|
function |
|
|
|
|
|
|
|
3.5 Information from the ISP
Before configuring this device, you have to check with your ISP (Internet Service Provider) what kind of service is provided such as PPPoE, PPPoA, RFC1483, IpoA.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE | VPI/VCI, |
| Password, Service Name, and Domain Name System |
| (DNS) IP address (it can be automatically assigned from |
| ISP or be set fixed). |
PPPoA | VPI/VCI, |
| |
| Password, and Domain Name System (DNS) IP |
| address (it can be automatically assigned from ISP or |
| be set fixed). |
|
|
RFC1483 Bridged | VPI/VCI, |
| this product into BRIDGE Mode. |
RFC1483 Routed | VPI/VCI, |
| Subnet mask, Gateway address, and Domain Name |
| System (DNS) IP address (it is fixed IP address). |
IPoA | VPI/VCI, IP address, Subnet mask, Gateway address, |
| and Domain Name System (DNS) IP address (it is fixed |
| IP address). |
20