WebShare 340/440

address on your PC to the LAN IP address of this router.

3.6.3.2.3 ADSL

Connect Mode: There are three modes ”ADSL”,”ADSL2”and”ADSL2+” that user can select for this connection.

Modulation: The default is Multimode; it will detect the ADSL line code, G.dmt, G.lite, andT1.413 automatically. But in some area, it cannot detect the ADSL line code well. At this time, please adjust the ADSL line code to G.dmt or T1.413 first. If it still fails, please try the other values such as ALCTL, ADI, etc.

Activate Line: Aborting (false) your ADSL line and making it active (true) again for taking effectwith setting of Connect Mode.

Coding Gain: Select to Coding gain from 0 to 7 dB or leave to auto

Tx Attenuation: Setting ADSL transmission gain, the value is between 0~12.

DSP Firmware Version: DSP code version

Connected: Display current ADSL line sync status.

Operational Mode: To show the state when user select “AUTO” on connect mode.

Annex Type: To show the router’s type, e.g. Annex A, Annex B

Upstream: Upstream rate

Downstream: Downstream rate

CO Vendor: Show your DSLAM Vendor

Elapsed Time: Show ADSL activity time from last syncronization

35