Wireless Broadband Router
shape item to push to reset this device to factory default settings. It will be useful too when the manager forgot the password to login, but the setting will be back to default setting.
2.4 Cabling
Plug in one end of the network cable to the WAN port of the Wireless Internet Broadband Router.
Plug in the other end of the network cable to the Ethernet port of the xDSL or Cable modem (E.G
Use another network cable to connect to the Ethernet card on the computer system; the other end of the cable connects to the LAN port of the Internet Broadband Router. Since the Wireless Broadband Router has four ports, you can connect up to four computers directly to the unit. There you do not have to buy a switch to connect these computers since one Internet Broadband Router functions both as a
The control LEDs of the Wireless Internet Broadband Router are clearly visible and the status of the network link can be seen instantly:
•With the power source on, once the device is connected to the broadband modem, the Power, LAN, WLAN and WAN port link LEDs of the Internet Broadband Router will light up indicating a normal status. Led Status blinks.
•While the WAN is link up to the ADSL/Cable modem, the WAN port’s Link/ACT LED will light up.
•While the LAN is link up to the computer system, the LAN port’s Link/ACT LED will light up.
Pag. 6 |