Wireless Broadband Router
Enable: Click to enable or disable the firewall rule profile.
Name: Type a descriptive name for the firewall rule profile.
Action: Select whether to allow or deny packets that conform to the rule.
Source: Defines the source of the incoming packet that the rule is applied to.
•Interface: Select which interface (WAN or LAN) the rule is applied to.
•IP Range Start: Type the start IP address that the rule is applied to.
•IP Range End: Type the end IP address that the rule is applied to.
Destination: Defines the destination of the incoming packet that the rule is applied to.
•Interface: Select which interface (WAN or LAN) the rule is applied to.
•IP Range Start: Type the start IP address that the rule is applied to.
•IP Range End: Type the end IP address that the rule is applied to.
•Protocol: Select the protocol (TCP, UDP, or ICMP) of the destination.
•Port Range: Select the port range.
Add: Click to add the rule profile to the table at the bottom of the screen.
Update: Click to update information for the rule if the user has selected a listed item and has made changes.
Delete: Select a listed item and click Delete to remove the item from the list.
Clear: Click to erase all fields and enter new information.
Priority Up: Select a rule from the list and click Priority Up to increase the priority of the rule.
Priority Down: Select a rule from the list and click Priority Down to decrease the priority of the rule.
Update Priority: After increasing or decreasing the priority of a rule, click Update Priority to save the changes.
Pag. 55 |