Wireless Broadband Router
A.1.3 LED WLAN
The WLAN LED on the front panel does not light up.
Steps | CORRECTIVE ACTION |
1Press the “Reset” button on the rear panel of the Wireless
Broadband Router, to set back to factory default setting.
2Please unplug AC Adaptor and
3If these steps fail to correct the problem, contact your local distributor for assistance.
A.2 WEB
I cannot access the web configurator.
Steps | CORRECTIVE ACTION |
1Make sure you are using the correct IP address of the Wireless Broadband Router. Check the IP address of the Router (192.168.1.1).
2Check Mac Filtering (on Security).
3Press the “Reset” button on the rear panel of the AP, to set back to factory default setting.
The web configurator does not display properly.
Steps | CORRECTIVE ACTION |
1Make sure you are using Internet Explorer 5.0 and later versions.
2Delete the temporary web files and log in again.
In Internet Explorer, click Tools, Internet Options and then click the Delete Files ... button.
When a Delete Files window displays, select Delete all offline content and click OK. (Steps may vary depending on the version of your Internet browser.)
Pag. 70 |