Wireless Broadband Router
A.3 Login
If you forget the password to log in.
Steps
1
CORRECTIVE ACTION
The Reset function is to reset the setting back to factory default setting, once you press the “RESET” button within 15 seconds, the LED of the WLAN will turn off. And when the device is ready, the WLAN LED will start blinking.
2
3
Before configurating this Wireless Broadband Router, you need to know the following default settings.
Username: admin
Password : admin
IP Address : 192.168.1.1
Subnet Mask : 255.255.255.0
Wireless: SSID= default, Channel=6, WEP=disable
To increase security level, it is important change password
after first configuration.
A.4 Remote Management
I can’t manage the dvice remotely.
Steps | CORRECTIVE ACTION |
1Make sure to insert Router ADSL IP in Default Gateway field of Wireless Broadband Router.
2Make sure that ADSL Router is correctly configured (create a port forwarding from port TCP 80 to Wireless Broadband Router IP Address).
Pag. 71 |