Wireless 108Mbps Multi-Function Access Point

3.1.5 Windows Vista

1.Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network and Sharing Center.

2.Click Manage network connections then double click on Local Area Connection.

3.Click Continue (Windows needs your permission to continue).

4.Select Internet Protocol Version 4(TCP/IPv4) and click Properties

5.Select the Use the following IP address radio buttons (EG IP=192.168.1.2 and subnet Mask=255.255.255.0).

6.Click OK to finish the configuration

3.2 Default Settings

Before configuring the Wireless AP through WLAN, make sure that the SSID, Channel and the WEP was set properly.

The default setting of the Wireless AP that you will use:

ƒUser: admin

ƒPassword: admin

ƒIP Address: 192.168.1.1

ƒSubnet Mask: 255.255.255.0

ƒWep Encryption: disable

ƒSSSID: default

ƒChannel:6

3.2.1 Password

When there is a screen needs to enter the Network password, it means that there is a password settle, type in the password you entered before.

3.2.2 LAN WLAN

The parameters of LAN and WLAN ports are pre-set in the factory. The default values are shown below.

LAN

 

WLAN

IP address

192.168.1.1

Channel=6

Subnet Mask

255.255.255.0

SSID=default

 

 

Encryption=none

 

 

 

A02-WAP-54G

Pag. 13