Wireless 108Mbps Multi-Function Access Point

ƒRestore to default settings: Click on “Default” button to restore the access point back to its manufacture default settings.

ƒFirmware Upgrade: Click on the “Browse” button to open a FileOpen Dialog box, where gets to select the firmware file, which download from the web for the latest version. Upon selecting the firmware file, click “Upgrade” and complete the firmware upgrade process when the Access Point re-operates after it restarts.

Do NOT upgrade firmware on any Atlantis Land product over a wireless connection. Failure of the device may result. Use only hard-wired network connections.

After upgrading you must reset the Access Point to factory default settings, then manually re-enter your settings.

Please pay attention. In case electrical shutdown, during this procedure, this product could be not usable.

When uploading software to theWireless Multi-Function Access Point, it is important not to interrupt the Web browser by closing the window or loading a new page. If the browser is interrupted, it may corrupt the software

A02-WAP-54G

Pag. 37