Wireless 108Mbps Multi-Function Access Point

3.8.3 Wireless Bridge / Multiple Bridge

Configure to the wireless bridge mode; these APs will be a LAN to LAN wireless Ethernet bridge between two separated Ethernet LAN segments.

AP Mode: Select Wireless Bridge.

Remote Bridge MAC: Enter the MAC address of the opposite AP here.

Note: These two APs must using same wireless channel setting (SSSID, Encryption, Channel).

You must make sure that the SSID, Encryption and Channel is set the same as that AP you wish to connect.

When Wireless Bridge / Wireless MultiBridge is enable only WEP ecryption is supported.

A02-WAP-54G

Pag. 31