OnePower Line Interactive UPS (EN)

Caution: Do not connect a laser printer to the outlets. These UPS outlets provide battery power and surge protection to the equipment when utility voltage is outside acceptable limits.

1.6Connect telephone / Network Surge protection and

USB

Connect a single line telephone or a 10 base-T / 100 base-T network cable into the RJ-45 / RJ-11 telephone / network surge protection “IN”jack on the back of the UPS. Connect from the “OUT”jack with telephone cable (supplied) or network cabling (not supplied) to a fax modem or network port.

Connect the supplied interface cable to the USB computer interface port on the back of the UPS. Connect to the computer. See software document for installation instruction.

A03-S1001/A03-S1501

Pag. 19