OnePower Line Interactive UPS (EN)
1.7Operation Test
1.Connect the UPS to the wall receptacle.
2.Push on the Main Switch to check the Green Line (
) LED is on.
3.Connect your computer equipment with sockets of the UPS and pull off the input power cable of the UPS from the wall receptacle to check the Line (
) and Inverter(
) LED are flashing every 2 seconds. Meanwhile, please check if alarm buzzer is beeping.
4.Try the field working condition by running some application programs on your computer and repeating step.
5.Check if the UPS is initiated properly to support continuous operation.
IMPORTANT NOTICE: Plug the UPS into the wall outlet to charge the UPS for over 10 hours before using the UPS.
1.8 Front Panel Explanations
On the front panel You can found 4 LED for an easy diagnostic.
LED
LED Line (
)
LED Inverter (
)Green LED remains standstill when Utility is normal.
Green LED flashes every 2 seconds when the UPS is in Battery charging mode.
Green LED remains standstill and simultaneously buzzer alarms continuously when the UPS is in overload condition.
Yellow LED flashes every 2 seconds and simultaneously buzzer alarms continuously when Utility failure.
Pag. 20 |