OnePower Line Interactive UPS (EN)
To Control on/off the UPS when Utility is normal. To enable-Start”“DC Function (To enable DC Start properly, you are recommended to connect <80% output load with the UPS only). P.S. Make sure the computer connected to the UPS is switched on before enable the "DC-Start" function. You are not recommended to add some other computer or peripherals after DC-Start function is activated. Red LED remains standstill and simultaneously buzzer alarms continuously when the UPS is in overload condition.
Red LED flashes every 0.5 seconds and buzzer alarms every 0.5 seconds when UPS is in battery low condition.
A03-S1001/A03-S1501 | Pag. 21 |
Main Switch
Overload LED (
)
Check Battery LED (
) 