A03-S1001/A03-S1501
Pag. 25
as missing ground or hot to
order to correct the building
The UPS operates 1.Building wiring error such 1.Call a qualified electrician in normally, but the

OnePower Line Interactive UPS (EN)

APPENDIX A: TROUBLE SHOOTING

If the UPS is not functioning properly, you can refer first to this chapter for simple troubleshooting before contacting your reseller. This could save you time and effort but if the problem persist, then consult your service provider.

A.1.1 UPS

The LED and the acoustic signals are a profit tool to individualize immediately possible problems

SituationCheck Items
Mains normal but

1.Is the power switch on?

Line ( ) LED is

2.Check the Fuse?

not on.

3.Is the power cord loose?

 

 

 

 

Inverter () LED 1.Battery voltage is too low. flashes every 2

seconds but no output.
Solution

1.Press Main Switch on.

2.Change fuse with same rating.

3.Re-connect the power cord properly.

1.Recharge the UPS for 24 hours.

Alarmbuzzer

1.Check the load status

 

1.Remove

some

uncritical

 

beeps

 

 

 

 

load.

 

 

 

continuously

 

 

 

 

 

 

 

whenUtility

is

 

 

 

 

 

 

normal.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Alarm

buzzer

 

 

1. Remove

some

uncritical

 

beeps

for

10

 

 

load and re-switch on the

 

seconds, then the

 

 

UPS.

 

 

 

UPS is turned off.

 

 

 

 

 

 

 

 

 

 

 

 

No

LEDs display

 

 

1. Contact Atlantis Land.

 

on the front panel

 

 

 

 

 

 

 

 

 

 

 

 

 

UPSdoesnot

1.The UPS’s ba

 

1.Charge the battery.

 

 

provideexpected

due to recent outage.

 

2.If the battery is near the end

 

backup time.

 

2.The UPS’s ba

 

of its service life, you have

 

 

 

 

 

the end of its service life.

 

to replace the battery.