|
|
|
|
| ENGLISH |
|
|
| |||
2 | RESET | After the device has turned on (turn on the | |||
power and wait 3 minutes), press and hold | |||||
|
| reset button for 5 seconds, then release it | |||
|
| to reset it (this is used when you can not | |||
|
| login to the DiskMaster, e.g. forgot the | |||
|
| password. |
|
|
|
3 | LAN(RJ45) | Please use the Ethernet cable to connect | |||
the DiskMaster to network. |
|
| |||
|
|
| |||
4 | USB(V1.1) | Please use the USB printer cable to | |||
connect | the | device’ | |||
|
| server). |
|
|
|
5 | POWER (jack) | Connect the supplied power adapter to | |||
this jack. |
|
|
| ||
|
|
| |||
6 | POWER(ON/OFF) | Press the power switch to start/shutdown | |||
the DiskMaster. It will take approximately 3 | |||||
|
| minutes to boot | up/and | shutdown the | |
|
| Operating System. |
|
| |
1.7 Default Settings
The TCP/IP protocol stack and Ethernet network adapter must be installed. If not, please refer to MS Windows relative manuals.
Before you configure this device you need to know the following default settings:
∙Username: admin
∙Password: atlantis
∙IP address: by DHCP, (If a DHCP server isn’t available in the network, the DiskMaster will use 192.168.1.1 and Subnet Mask 255.255.255.0).
∙Server name: DiskMaster
DiskMaster | 39 |