ENGLISH

4Reset the device.

A.4 General

Why Can’t I perform RAID ?function und

Steps

Corrective Action

1FAT32 format doesn’t . support

2To perform RAID functions please use EXT2 or EXT3 format.

Some of the functions and menus are not available!

Steps

Corrective Action

1Many of the functions require a hard drive to be installed. Make sure you have at least one HDD installed and formatted in EXT2 or EXT3.

When install two HDD without performing RAID setting, and creating a Share-Folder, Why NAS can only to create Folder an the second Disk (/mnt/ide3/sharefolder) and not on the first Disk (/mnt/ide1/sharefolder).

Steps

Corrective Action

1The NAS GUI Software is designed to managing RAID 1 or 0 functions, if user wants to use two separate HDD in the NAS, share management will recognize only the first formatting disk. For example, if user format Ide1 HDD first than managing priority goes to Ide1. But still another HDD space can be recognize in the LAN development. User can browse it through “My Network place”

What is the limitation of user on the NAS FTP, Samba and account mode?

Steps

Corrective Action

1There are following limitations.

1.Maximum user number: FTP: 8 Users, Samba: 8 Users (total 24 sessions at the same time).

2.FTP Server: Maximum is able to create 32 users accounts,

8users account connect at the same time, and maximum 16 folders shared by one account).

3.Samba Server: Share Level Access (maximum 16 folders shared by root).

DiskMaster

57