ENGLISH
disk can operate independently and is seen as an individual disk. Therefore, the total capacity of JBOD is the sum of the capacities of each disk. This allows the user to add disks until the desired total capacity is reached. Since JBOD provides no performance increase and data protection, it is seldom used.
1.10 How to login
To configure your DiskMaster , you will need to use the web browser, enter the IP address and then use the web configuration for further setup. To find out the IP address of your device once it is connected to the network, there are several different ways as described on the following pages.
Use the Setup utility included on the CD. This will list the device automatically and allow you to access the web configuration interface with a simple click of your mouse. You may also use the same utility at a later point to map the network drive after you setup your shares.
∙Turn on your DiskMaster and make sure it is connected to the same network as your computer.
∙Start the Setup utility (CDRom:\Utility\setupUtil.exe) by double clicking on the Setup file and then pressing the Setup button.
∙Your DiskMaster will automatically show up in the device list, but if not (click again on Search Again), make sure the Setup utility has access to the network and search again. You might have to configure your firewall or even temporarily turn it off.
∙Select your device and click on OK to start the setup wizard.
DiskMaster | 49 |