Atlas MLGS180B, MLGS180W manual Operation, Test, Auto, Manual Mode

GUARDIAN PRO™

MOTION SENSOR

Models MLGS180B

MLGS180W

TEST

Put the ON-TIME switch on the	ON-TIME
bottom of the sensor in the TEST
position.
	10 5 1 TEST
AUTO
Put the ON-TIME switch in the 1,		ON-TIME
5, or 10 minute position.
	10 5 1 TEST
MANUAL MODE

Features

•Turns on lighting when motion is detected.

•Automatically turns lighting off.

•Photocell keeps the lighting off during daylight hours.

•LED indicates motion was sensed (day or night).

Requirements

• The Light Control requires 120-volts AC.

• If you want to use Manual Mode, the control must

Manual mode only works at night because daylight returns the sen- sor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5, or 10 position.

1 Second OFF

then...

... back on.

be wired through a switch.

• Some codes require installation by a quali-

fied electrician.

OPERATION

Mode:	On-Time:	Works: Day	Night
Test	5 Sec	x	x
Auto	1, 5, 10 min.		x
Manual	Until Dawn*		x

* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

Mode Switching Summary

	TEST	Move ON-TIME Switch to
			1, 5, or 10 minutes
	AUTO			Flip light switch off
				for one second
MANUAL MODE				then back on*

*If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time the control will be in the AUTO mode.

	240-029-A
© 2003 Atlas Lighting Products, Inc.	598-1096-01