CP400 & CP700 COMMERCIAL POWER AMPLIFIER
TABLE OF CONTENTS
OWNER'S MANUAL
Introduction, Features, Applications.............................................................………………………………….3
Front Panel Description......................................................................…………………………………..…….4
Rear Panel Description......................................................................…………………………………..……..5
Input Wiring......................................................................…………………………………..…………………..7
Speaker Output Wiring...................................................................................………………………………..9
Specifications..........................................................................................…………………………………….15
Warranty................................................................................................……………………………………...16
Safety Instructions
Please Read Carefully Before Installing or Operating This Product
•Read instructions fully.
•Pay attention to any and all warnings.
•Connect this amplifier only to the correct operating voltage.
•Do not attempt to service this unit. Only a qualified service technician should open this unit for servicing.
•Warning
Hearing Damage!
All professional loudspeaker systems are easily capable of producing very high sound pressure levels. Use care with the operation of this amplifier and wear the appropriate hearing protection. Exposure to excessive sound pressure levels can cause permanent hearing damage.
Shock Hazard!
The Atlas Sound CP400 and CP700, when in operation, can produce a shock hazard at the speaker terminals. Make sure the amplifier is turned off when installing or removing connections at the speaker terminal barrier strip. After connecting the proper speaker load, REPLACE the terminal strip cover!
Ventilation
Although the CP400 and CP700 are internally fan cooled and have thermal protection circuitry, adequate ventilation is required to ensure
Rack Mounting
Although the internal output transformers are mounted close to the front panel, when rack mounting the CP400 and CP700, be sure the unit has adequate front and rear support.
Specifications are subject to change without notice
AtlasSound.com
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • | TELEPHONE: (800) | FAX: (800) | |
©2008 ATLAS SOUND LP | Printed in U.S.A. | ATS002102 RevD 2/08 | PP |
2