Atlas Sound user service Unbalanced Input, CP400 & CP700 COMMERCIAL POWER AMPLIFIER

CP400 & CP700 COMMERCIAL POWER AMPLIFIER

OWNER'S MANUAL

Unbalanced Input

Unbalanced wiring typically is found on consumer equipment (CD players, DVD players, etc.) and is generally a compromise of noise rejection and cable lengths. A single conductor and an overall shield are most common, as in the standard cables supplied with consumer equipment. Keep unbalanced wire lengths within 10' between equipment, wire the hot lead to the “+” terminal, and the shield to the ground terminal. Install a jumper wire between the “-” terminal and the ground – a loss of gain will result without this jumper (Figure 4).

White/Red (+)	White/Red (+)
Shield	Shield

Jumper

Figure 4

Specifications are subject to change without notice

AtlasSound.com

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •		TELEPHONE: (800) 876-3333 •	FAX: (800) 765-3435
©2008 ATLAS SOUND LP	Printed in U.S.A.	ATS002102 RevD 2/08	PP

8