Atlona AT-HDMI40SR user manual

Note for EDID (Extended Display Identification Data) learning

1.Please connect the display which you want to read EDID with a HDMI cable to the transmitter’s HDMI-INand turn Mode to 7 so the Transmitter can learn the EDID information from the connected HDTV. The LED on the RJ45-OUT of Transmitter will dim and light again in a few seconds, which indicates the EDID learning process is completed.

2.Turn Mode clockwise from Mode 7 to Mode 0 or Mode 1 for desirable audio setting and enjoy the experience. DO NOT let the rotary arrow pass by Mode 6 which will erase the EDID just learned and restore the default EDID.

After the EDID is learned, please turn MODE to 1, then begin to adjust EQ on Receiver from 7 to 0.

7