Audio2000's AKJ7809 manual ¼ Inch PRE- OUT Connections, Connecting Effects Using the Effect Insert

Basic Connections

3.¼ INCH PRE- OUT CONNECTIONS:

●Connect one end of the ¼ inch audio cables to the left and right PRE- OUT jacks on the AKJ7809. ●Connect one end of the ¼ inch audio cables to the left and right AUDIO/LINE/AUX INPUT jacks on

the external device.

PRE-OUT

4.CONNECTING EFFECTS USING THE EFFECT INSERT:

1.Connect one end of the ¼ inch stereo audio cables to the GUITAR EFFECT, KEYBOARD EFFECT, or MIC EFFECT inserts on the rear panel of the AKJ7809.

2.Connect the other end of the ¼ inch stereo audio cables to the sound effect device.

3.By using the built-in EFFECT INSERT you can add external effects to vocals and/or guitar or keyboard or microphone without compromising the quality of the original signal.

DVD Output Connections

The effect insert is a break point in the input channel signal path, It allows the signal to be taken out from this

AKJ7809, through an external equipment such as a Limiter,Compressor,Equalizer, Effector,and then back to the

AKJ7809,the input jack can be used with ¼ inch phone jack,the signal will be send out through TIP of the ¼ inch

phone jack and back to the AKJ7809 through RING of the ¼ inch phone jack.

7