Audio2000's AKJ7809 manual DVD Output Connections

DVD Output Connections

DVD OUTPUT CONNECTIONS 1.Connecting to a Dolby Pro logic amplifier

The AKJ7809 allows DVD audio output for 5.1 or 7.1 configurations.

With a 5.1 amplifier, you will need six RCA patch cables. Connect the plug from one side of each cable to the ML, CEN, SL, MR, SW and SR outputs on the AKJ7809. Connect the plug from the other side of each cable to the corresponding ML, CEN, SL, MR, SW and SR inputs on your 5.1 amplifier.

A 7.1 Pro Logic configuration requires 2 additional RCA cables to be connected from the FL and FR outputs of the AKJ7809 to your 7.1 Amplifier.

2.Connecting to a TV with component video

Using 3 appropriate component video cables (usually color coded red, blue and green), connect a set of plugs to the COMPONENT VIDEO OUT jacks (Y-U/Pb-V/Pr) on the AKJ7809 and plug the other set of plugs to the COMPONENT VIDEO IN jacks (Y-U/Pb-V/Pr) on your television. On some TVs, the component video input jacks may be labeled diff-erently (i.e. Pr/Pb/Y or Cr/Cb/Y or R-Y/B -Y/Y etc.). You will need to press the MODE button on the remote control to toggle between YUV for Component Video, and S -Video. You can only use the MODE button when there is no disc inserted in the disc tray.

8