INSTALLATION INSTRUCTIONS
FOR
CHEVROLET VENTURE
OVERHEAD CONSOLE for use with FLIPDOWN VIDEO SYSTEM
These instructions are intended for use only by experienced professionals in the automotive customizing business. Special tools and equipment, as well as specialized handling and care
of product during installation, may be required. Before beginning this installation, carefully read through the following instructions. Use extreme care when cutting headliner material.
Check for wiring or other componentry above headliner material. Cut only where indicated.
Materials/ Tools required for this installation:
1. | #2 Phillips screwdriver | 2. | Powered screwdriver or drill with adapter |
3. | 4. | Razor knife or similar | |
5. | Awl or similar tool | 6. | 1/4” hex socket bit |
7. | 18 GA wire 4' | 8. | Audiovox Series 640/650 Video Module |
NOT FOR VEHICLES EQUIPPED WITH SUN ROOF.
INSTALLATION INSTRUCTION # | June 2, 1999 | |
Printed in the U.S.A | ||
|
