Audiovox ACD-32A LEFT/RIGHT Balance Control, Loudness Contour, Audio Mute, AM/FM Band Selector

adjust the treble response as desired. The treble level will be shown by the bars on the display panel from a minimum of ----- to a maximum of ----- (a

single bar in the center of the display represents flat response). The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

6LEFT/RIGHT BALANCE CONTROL

To adjust the left-right speaker balance, first select the Balance mode by pressing the Select button 3 until the “BAL” indication appears on the display panel. Within 5 seconds of choosing the Balance mode, press the - button of the Level Control 2 to adjust the stereo balance to the left channel speak- ers or the + button of the control to adjust it to the right channel speakers. The balance position will be shown by the bars on the display panel from L----- (full left) to -----R (full right). When the

volume level between the left and right speakers is equal, L - R will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

7FRONT/REAR FADER CONTROL Adjustment of the front-rear speaker balance in 4 speaker installations can be made using this con- trol in systems using the internal amplifier of the radio for the front speakers and an optional exter- nal amplifier (via the pre-amp level output leads) for the rear speakers. To adjust the front-rear

speaker balance, first select the Fader mode by pressing the Select button 3 until the “FAD” indication appears on the display panel. Within 5

seconds of choosing the Fader mode, press the - or the + buttons of the Level Control 2 to adjust the front-rear speaker levels as desired. The fader position will be shown by the bars on the display panel from R----- (full rear) to -----F (full front). When the volume level between the front and rear

speakers is equal, R - F will be shown on the display panel. The display will automatically return to the normal indication 5 seconds after the last adjustment or when another function is activated.

NOTE: In systems using only the internal amplifier of this unit, the fader control is not functional and must be left at the full front position (“ -----F ” on display panel).

8LOUDNESS CONTOUR

When listening to music at low volume levels, this feature will boost the bass and treble ranges to compensate for the characteristics of human hear- ing. Press the button to activate this feature as indicated by “LOUD” on the display panel. Pressing the button again will de-activate the function and “LOUD” will disappear from the display.

9AUDIO MUTE

This button is used to mute the volume from the system. By pressing the button, the indication “MUTE” will appear on the display panel and the volume will be muted. When in the Mute mode, the Volume/Level Controls 2 and Select button 3 will be disabled. Press the Mute button again to return to the volume level setting in use before the Mute function was activated.

blRADIO ON

AM/FM BAND SELECTOR

Press this button to turn the radio on.

During radio play, each time the button is pressed, the radio band changes. The indications “AM1”, “AM2”, “FM1”, “FM2”, or “FM3” will appear on the display panel according to your selection.

During CD play, pressing this button will change to radio operation without ejecting the disc.

bm&bnMANUALUP/DOWNTUNING( / ) To manually select a radio station, momentarily press the Up Tuning ( ) button bm to advance the unit one digit higher or the Down Tuning () button bn to tune downward. Continue to press either button to tune the radio rapidly in the selected direction.

bo AUTOMATIC UP SEEK TUNING ( ) bp AUTOMATIC DOWN SEEK TUNING ( )

Pressing either button will activate the Automatic Seek Tuning function in the selected direction. The radio will seek the next available station and stop at that frequency. The Seek function can also be stopped by pressing the button again or activating any other tuning function.

OPERATING INSTRUCTIONS

12

128-5272

13 of 20