Audiovox ACD-32A manual Specifications, Frequencystepswitch

SPECIFICATIONS

Size:

Operating Voltage:

Output Power:

Output Wiring:

7" W x 2" H x	6-1/4" D
178 mm x 50 mm x	160 mm

12 volts DC, negative ground

64 watts maximum

Floating-ground type designed for 2 speaker use. May also be used with 4 speakers.

RCA low-level outputs.

Output Impedance:

Low-Level Output:

Tuning Range:

Sensitivity:

Compatible with 4-8 ohm speakers.

500 mv.

AM: 530-1,720 KHz. (10 KHz. step) 522-1,620 KHz. ( 9 KHz. step)

FM: 87.5-107.9 MHz. (200 KHz. step) 87.5-108.0 MHz. (50 KHz. step)

AM: 20 uv.

FM: 1.5 uv.

FM Stereo Separation: 30 dB

CD Frequency Response: 20-20,000 Hz. ± 2dB

CD Signal/Noise Ratio:	>70 dB
CD Channel Separation:	>60 dB
CD Dynamic Range:	>80 dB
CD Distortion:	<0.1% T.H.D.

*Specifications are subject to change without notice.

FREQUENCYSTEPSWITCH

This unit is supplied pre-set at the factory for reception of North American radio stations (10 KHz. channel spacing on AM/200 KHz. spacing on FM). Use in other areas in the world may require different channel spacing. A switch on the bottom of the chassis allows selection of 9 KHz. AM/50 KHz. FM channel spacing. Slide the switch to the appropriate position using a small screwdriver blade. The Re-Set button dm on the front of the chassis must then be pressed to activate the change of channel spacing.

SPECIFICATIONS

16

128-5272

17 of 20