To Place a Call with the Manual PIN Entry
1.Enter the number you are calling, or recall the number from a specific memory location.
2.Press 
. Your call will be processed. Listen for a double beep, which will prompt you to send
your PIN.
3.Enter your PIN number, and press 
. Your call will then be placed.
To Place a Call with the Automatic PIN Feature
1.Enter the number you are calling, or recall the number from a specific memory location.
2.Press “SEND” key 
. As your call is being
processed, you will have the display:
3. Press “SEND” key 
again. Your call will then be placed.
Note: Before you can use this feature, you must pro- gram your PIN and turn the Automatic PIN fea- ture on. (See procedures below.)
To Place a Call to Voice Mail using the Automatic PIN Feature
(See Voice Mail Dialing on page 44.)
1. Press V
for more than one second. As your call is being processed, you 
will have the display:
2.Press V
again, your PIN will be sent.
3.Press V
again. The second number stored in V
will be sent in Touch Tone™ signals.The sub-
sequent numbers, if any, can be sent sequentially by pressing V
.
To Turn the Automatic PIN Feature On/Off (F54-5)
1. | Press | F | 5JKL 4 GHI and |
|
|
| 5JKL . |
|
|
|
|
2. | You can turn this feature on/off by | or | . | ||
3. | Press | F | to set. |
|
|
63
