To Store the Voice Mail Access Number
Please see To Store Linked Numbers in Phonebook on page 38, and follow the steps 1 ~ 3 to make a set of
linked numbers. Press 
V
to store. Up to 80 digits of linked numbers can be stored including link mark “ = ”.You can also add a Name Tag (up to 20 to 24 characters) with your voice mail number. (See To Store a Name with Phone Number on page 27.)
To Call Your Voice Mail
1.Press and hold V
. The first number will be dis- played and dialed.
2.Press V
. The second number will be displayed and sent in Touch Tone™ signal.
3.The succeeding numbers can be sent sequentially
by pressing V
.
To Review the Voice Mail Access Number
1. Press 
Rcl to select the Phonebook Address Mode.
2.Press V
. The first linked number in V
will be displayed.
3. Press F
(one or more times) to display the re-
maining linked numbers in V
.
Text Messages (Short Message Service)
Your phone is able to receive and display Text Mes- sages of up to 255 characters long. The Text Message memory stack can store up to 30 messages. When an SMS message is received, the following occurs.
1.A short beep tone sounds.
2.The 
indicator at the upper right of the display
flashes to alert you.
The display indicates “NEW
MESSAGE” with animation.
3.The Text Message just re-
ceived is stored in the Memory Stack. To review stored messages, see To Review aText Message on page 46.
4.If the Memory Stack is full, any new Text Messages
will not be stored, and you will have the display:
45
