Audiovox D2010 owner manual System Connections, Power Supply Connection, Connecting to a TV

System Connections

Note: Before plugging the power cord into an AC outlet, make sure that all other connections have been made as described below.

Power Supply Connection

Connect the supplied adapter to the side of the DVD player in the jack marked “DC 12V IN”. Plug the two-prong end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug, turn it over and reinsert it. If the DVD Player will not be used for a long time, disconnect the plug from the outlet.

Connecting to a TV

Audio/video connections

Always ensure that the DVD player, TV and any other electrical components are switched OFF before connecting to the DVD player.

The easiest way to connect the DVD player to a television is via the supplied Audio/Video cable. Connect the audio/video cable from the DVD player to the audio/video inputs of the TV. And then switch the AV IN/OUT button to OUT.

Note: Noise may occur in speaker when there is an external audio signal input while

playing a DVD disc. Unplug the audio cord to clear the noise.

This player only outputs NTSC signals. Make sure to use NTSC input type monitor/TV. If the picture is distorted or colorless, please check the type monitor/TV.

Do not connect an audio/video input while the A/V in/out switch is in the out position. This may result in unwanted audio or video distortion.

- 11 -