USB and SD/MS/MMC Card Function
USB and SD/MS/MMC Card Function
Preparation:
1.Connect the unit to the power supply.
2.Press the POWER to turn on the unit.
3.Press the SOURCE button to shift to DVD mode.
4.Insert the USB into the unit’s USB slot, or insert the SD/MS/MMC card into the SD/MS/MMC card slot on the right side of the unit. Please see the below figure:
Make sure that files are stored in the USB and the SD/MS/MMC card before the connection.
5.Press the CARD button to shift among disc playback, USB playback and the SD/MS/MMC playback. The default state is disk playback. Please see the below figure:
00:00 00:00 001/002
BAK
JPEG
6. | Press the | , | button to select the folder, and press ENTER button to enter. | |
7. | Press the | and buttons to select the desired track. Then press PLAY button to start | ||
| playback. |
|
|
|
8. | Press STOP | button to stop playback: if the STOP | button is pressed, the playback will start | |
| from the beginning of the current track. Press the | button to return to the folder menu. | ||
Note:
1.The screen display will vary from disc to disc.
2.Pull out the USB or SD/MS/MMC card directly after the files are played. Then the unit will be in disc playback again.
- 32 -
