Audiovox FPE2705 operating instructions Installation, Antenna connections

Installation

Antenna connections

Install the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.

OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT INCLUDED)

Follow the instructions for the type of antenna system you intend to use. If using Cable or satellite, see

the next page.

Combination VHF/UHF	Combination VHF/UHF
Antenna (Single 75 Ohm cable	Antenna (Separate VHF and
or 300 Ohm twin-lead wire)	UHF 300 Ohm twin-leads)
	UHF 300 Ohm	UHF 300 Ohm

VHF/UHF	Combiner	VHF 300	Combiner
75 Ohm		Ohm
			VHF 75 Ohm

Connect the 75 Ohm cable from combination VHF/UHF antenna to the antenna jack.

OR

If your combination antenna has a 300 Ohm twin-lead wire, use a 300-75 Ohm matching transformer (NOT SUPPLIED).

Connect the UHF twin-lead wire to a combiner (NOT SUPPLIED). Connect the VHF twin-lead to a 300-75 Ohm matching transformer (NOT SUPPLIED). Attach the transformer to the combiner. Attach the combiner to the antenna jack.

Connect the 75 Ohm cable from the VHF antenna and the UHF antenna twin-lead wire to a combiner (NOT SUPPLIED). Attach the combiner to the antenna jack.

NOTE: If your VHF antenna has a twin-lead wire use a 300-75 Ohm matching transformer, then connect the transformer to the

12