Audiovox FPE3205 manual Basic Operations, Changing Channels, Adjusting the Volume, Using the Mute

Basic Operations

Changing Channels

Using the Channel Buttons (CH5 or CH6)

Press the CH5or CH6 to change channels.

When you press the CH5 or CH6, the unit changes channels in sequence. You will see all the channels that the unit has memorized.

You will not see channels that were erased.

Direct Accessing Channels

Press the number buttons to go directly to a channel.

To select a one-digit channel: press the 0-9 number buttons to input the channel number and the unit automatically goes to the selected channel in some seconds.

To select a two-digit channel: press the 0-9 number buttons to input the channel number and the unit goes to the selected channel immediately.

To select a three-digit channel: press the ---button to display “1--”, then press the 0-9 number buttons to input the remain two digits of the channel number, then the unit goes to the selected channel.

Note:

When you use the number buttons, you can directly select channels that were erased.

Using the Return button

Press this button to switch between the current channel and the previous channel.

Adjusting the Volume

Using the volume buttons (VOL+ and VOL-)

Press the VOL + or VOL- to increase or decrease the volume.

Using the Mute

Using the Mute

button

At any time, you can temporarily cut off the sound using the Mute button.

1 Press the

button and the sound cuts off.

2 To turn mute off, press the

button again.

20